Garage Door Opener Repair Cheyenne

J&M Garage Door Repair had a Garage Door Opener Repair project in Cheyenne, WY.  The homeowner called for a garage repair since they wanted to fix their garage door opener. We responded quickly to their request for a garage door repair Cheyenne as the homeowner was looking for a residential garage door repair company.  We were able to repair the garage door opener quickly for the homeowner.

When your garage door opener suddenly stops operating properly, the cause of the problem is usually pretty simple to understand though it is best to contact a residential garage door repair company to handle these issues.

3 Typical Causes of Garage Door Opener Malfunction

• Before hitting the ground, the garage door reverses.

These are some  issues that can cause a garage door to reverse before it even reaches the ground:

• The closing force—the pressure with which a door is permitted to descend before the motor switches off—is controlled by an adjustment screw on garage door openers. It's common for the door to reverse before it even reaches the floor because the close-force setting needs to be adjusted. The door opener is being fooled by the friction of the door rollers within the tracks into thinking the door has reached the floor, and the opener needs to be adjusted for reduced sensitivity.
• Extra friction can be created by damaged or corroded rollers, deceiving the door opener into stopping too soon. To avoid this problem, make sure the rollers are in good shape and adequately greased.
• After touching the ground, the garage door reverses immediately.

It's also a close-limit switch issue if the garage door shoots upwards as soon as it touches the ground. Close the door opener motor's close-limit adjustment screw in modest increments until the door comes to a complete halt when it touches the floor.

• The garage door does not fully open.

The following are the most likely causes when the garage door ascends correctly but stops short of fully opening. Garage door opener repair should take place:

• It's possible that the up-limit switch has to be moved closer to the motor unit. This switch is normally a simple touch-lever positioned near the motor unit at the end of the track; if it is too far away, the motor will stop the door from fully opening.
• The switch should be moved closer to the motor unit as a solution. This is a somewhat uncommon issue that usually manifests itself shortly after the installation of a new garage door opener. The door may also stop short of fully opening due to intractable or damaged rollers. Inspect and repair any rollers that are damaged.

So as you see, garage door repairs can vary, and a trusted garage door repair company such as J&M Garage Doors can be relied upon to handle any garage door problems you encounter. Learning the different types of garage door problems will make it less complicated for you to relay these issues to a garage door repair company. Never forget, you should never try and fix the problem yourself. Always hire a professional to repair any garage door problem dependably including garage door opener repair.

At J&M Garage Door Repair, we specialize in the repair, installation, replacement, and maintenance of garage doors in Cheyenne, WY.  If you are concerned about the quality, cost, and reliability of our service, you can trust our residential garage door repair company. We assure you that J&M Garage Door Repair will provide you with the best services in the area at the best prices. Call us today at (307) 222-3830, and we will respond to your request as soon as we can.